Argox F1 Manuel d'utilisateur télécharger pdf (Page 43)

Cutting Mode

Note: For cutting mode you must first install the cutter—please refer to

Appendix A.

Follow steps 1 to 6 in ―Loading Media – Standard Mode‖ above and then

continue with the steps below.

7. Thread the media over the platen roller, and then route the media through

the slot of the cutter module. (Figure 15)

Figure 15

8. Press down the print head module firmly.

9. Turn on the printer or press the ―FEED‖ button if the printer is already on.

(Figure 16)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Pas de commentaire

Argox F1 Manuel d'utilisateur Page 43