Argox OS-214ZIP Spécifications télécharger pdf (Page 44)

Appendix II - Installing the Cutter

1. Turn off the printer power and unplug the power cable and

Centronics / Serial cable.

2. Remove the top cover.

3. Remove the two screws under the base housing.

4. Remove the whole print head assembly by releasing the 4

screws at its feet.

5. a. Mount the cutter IC (3717) to U19 on the main board

(OS-204/214).

b. Mount the cutter baby board to JP29 on the main board

(OS-214ZIP).

c. Mount the cutter baby board to JP17 on the main board

(OS-203).

d. Mount the cutter baby board to JP29 on the main board

(OS-314).

Print Head Assembly

1 2 ... 39 40 41 42 43 44 45 46

Pas de commentaire

Argox OS-214ZIP Spécifications Page 44