Argox OS Series Spécifications télécharger pdf (Page 16)

15. Close the top cover and turn on the printer or press the

"FEED" button if the printer is already on.

Note: The "FEED" button does not make the printer peel.

Peeling occurs only when the software is properly set.

Label

Cutting Mode

Note: For Cutting mode you must first install the cutter. Please

refer to Appendix II.

Follow Steps 1 to 8 listed in Standard Mode above.

9. Thread the media over the platen roller, then route the

media through the slot of the cutter module.

10. Press down the print head module firmly.

Cutter Module

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

Pas de commentaire

Argox OS Series Spécifications Page 16