Argox OS Series Spécifications télécharger pdf (Page 41)

4. Remove the whole print head assembly by releasing the 4

screws at its feet.

5. a. Mount the cutter IC (3717) to U19 on the main board

(OS-204/214).

b. Mount the cutter baby board to JP29 on the main board

(OS-214ZIP).

c. Mount the cutter baby board to JP17 on the main board

(OS-203).

d. Mount the cutter baby board to JP29 on the main board

(OS-314).

Print Head Assembly

6. Secure the four screws attaching the cutter.

7. Plug the cutter's connector into the PCB's header

connector (JP13).

8. Reattach the print head assembly by securing the 4

screws.

9. Click back the middle cover.

10. Secure the two screws for the base housing.

11. Click the top cover into place.

Cutter

1 2 ... 36 37 38 39 40 41

Pas de commentaire

Argox OS Series Spécifications Page 41